Embroidery Placement Chart for Shirts - Part 3

27. September 2010 15:38 by Administrator in Embroidery Tips  //  Tags:   //   Comments (0)

Embroidery Placement Chart for Shirts - Part 3

ITEM PLACEMENT OTHER CONSIDERATIONS
Collar point

Bottom of monogram should be 1/4 inch above the top of the buttonhole.  

Monograms should be 1/4 inch to 3/8 inch high.  The collar may need to be removed and replaced.  

Turtle Neck Collars

Halfway between the center neck front and the left shoulder seam.  The bottom of the design should be 1/2 to 3/4 inch above the edge.  

Should be 1/4 to 1 inch tall, depending on size of collar.  Follow the direction of the edge, don't try to turn at an angle so it's straight when you're looking at it.  

Shirt Placket Centered between 2nd and 3rd buttonholes. Should be 1/4 to 3/8 inch tall. 

Shirt Pocket

For designs that are on the pocket itself

Top of monogram or name should be 1/4" to 1/2" from the top edge of the pocket, and centered between the left and right edges of the pocket. 

Alternatively, if the pocket isn't attached, you can put a crest or other design on the center of the pocket, then attach it to the shirt.
Monograms should be 1/4 to 3/8 inch tall.  
Shirt Sleeves
Short Sleeves
Place 1/4 to 1/2 inch above hem stitching on edge of sleeve.  Center design directly opposite the underarm seam. Monograms should be 1/4 to 3/8 inch tall.  
Shirt Cuffs
Long Sleeves
Fold cuff in half, starting with button at one side, and buttonhole on the other side.  Edge of monogram should be 1 inch from the center of cuff, towards the buttonhole.  (Center of monogram should be 1 3/8 inches from the center).  The bottom of the monogram should be 1/4 inch above the stitching at the bottom edge of the cuff. Monogram lettering should be 1/4 to 3/8 inch tall.  

Shirt Euro Tail 
(Front Bottom)

Bottom of design should be 1 1/2 inch above stitching for lower shirt hem.  Center of design should be 2/3rds of the way from the center front to the outside left edge (approximately 7 inches from center).  

Lettering should be 1/4 to 1/2 inch tall.   

Add comment

  Country flag


  • Comment
  • Preview
Loading

Month List